Scopus     h-index: 24

Document Type : Short Review Article


1 Department of Chemical Engineering, Mahshahr Branch, Islamic Azad University, Mahshahr, Iran

2 Department of Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran



One of the most important parts in choosing a well completion is to study the geological and reservoir structure of the well where the well is located. For instance, if the reservoir material is of a carbonate type, it can be consolidated into an open cavity. If the material of the reservoir where the well is located is sandstone, the first step to take is to determine the rock mechanics properties of the reservoir. In this study, while introducing and presenting a variety of complementary methods, the effects of various variables such as GOR, PI, reservoir pressure and wellhead flowing pressure, water cut, WCT percentages, and choke size reducing on the natural flow rate of the well were investigated.

Graphical Abstract

Optimization of Well Production by Designing a Core pipe in one of the Southwest oil Wells of Iran


[1] Bozorgian, A; Arab Aboosadi, Z; Mohammadi, A; Honarvar, B; & Azimi, A; (2020), Prediction of Gas Hydrate Formation in Industries. Progress in Chemical and Biochemical Research, 3(1), 31-38.
[2] Sajjadifar, S; Hamidi, H; Pal, K; (2019). Revisiting of Boron Sulfonic Acid Applications in Organic Synthesis; J. Chem. Rev. 1(1), 35-46.
[3] Munyao, O.M; Thiong'o, J.J; Muthengia Wachira, J; Karanja Mutitu, D; Romano, M; Murithi, G; (2019), Use of Bacillus Species Bacteria in Protecting the Concrete Structures from Sulphate Attack, J. Chem. Rev. 1(1), 287-299.
[4] Abubaker Abdalsamed, I; Ali Amar, I; Ali Altohami, F; Ali Salih, F; Salh Mazek, M; Abdusalam Ali, M; Ahmed Sharif, A; (2019), Corrosion Strategy in Oil Field System, J. Chem. Rev. 1(1), 28-39.
[5] Omar Errayes, A; Abdussalam-Mohammed, W; Omar Darwish, M; (2019), Review of Phytochemical and Medical Applications of Annona Muricata Fruits, J. Chem. Rev. 2(1), 70-79.
[6] Pagar, T; Ghotekar, S; Pagar, KH; Pansambal, SH; Oza, R; (2019), A Review on Bio-Synthesized Co3O4 Nanoparticles Using Plant Extracts and their Diverse Applications, J. Chem. Rev. 1(4), 260-270.
[7] Samimi, A; Zarinabadi, S; (2016), Investigating the Factors Influencing the Flow Behavior and Performance of Condensate Gas Reservoirs, Journal of Fundamental and Applied Sciences, 8(2), 1133-1142.
[8] Samimi, A; Zarinabadi, S; Shahbazi Kootenaei, A; Azimi, A; Mirzaei, M; (2020), Considering Different Kinds of Gasoline Unit Catalysts, Journal of Medicinal and Chemical Sciences, 3(1), 79-94.
[9] Nikam, A; Pagar, T; Ghotekar, S; Pagar, KH; Pansambal, SH; (2019), A Review on Plant Extract Mediated Green Synthesis of Zirconia Nanoparticles and Their Miscellaneous Applications, 1(3), 154-163.
[10] Olsson, A. G., Pauciullo, P., Soska, V., Luley, C., Pieters, R. E., Broda, G., ... & Fluvastatin Study Group. (2001). Comparison of the efficacy and tolerability of fluvastatin extended-release and immediate-release formulations in the treatment of primary hypercholesterolemia: a randomized trial. Clinical therapeutics, 23(1), 45-61.
[11] Toth, P. P., Worthy, G., Gandra, S. R., Sattar, N., Bray, S., Cheng, L. I., & Deshpande, S. (2017). Systematic review and network meta‐analysis on the efficacy of evolocumab and other therapies for the management of lipid levels in hyperlipidemia. Journal of the American Heart Association, 6(10), e005367.
[12] Black, D. M., Bakker-Arkema, R. G., & Nawrocki, J. W. (1998). An overview of the clinical safety profile of atorvastatin (Lipitor), a new HMG-CoA reductase inhibitor. Archives of internal Medicine, 158(6), 577-584.
[13] Macedo, A. F., Taylor, F. C., Casas, J. P., Adler, A., Prieto-Merino, D., & Ebrahim, S. (2014). Unintended effects of statins from observational studies in the general population: systematic review and meta-analysis. BMC medicine, 12(1), 51.
[14] Samimi, A; Zarinabadi, S; Shahbazi Kootenaei, A; Azimi, A; Mirzaei, M; (2019), Study of Operational Conditions in Octanizer and Hydro-treating Units in Oil Refinery Company, Journal of Chemical Reviews, 1(3), 164-182.
[15] Rosa, G. M., Carbone, F., Parodi, A., Massimelli, E. A., Brunelli, C., Mach, F., & Montecucco, F. (2014). Update on the efficacy of statin treatment in acute coronary syndromes. European journal of clinical investigation, 44(5), 501-515.
[16] Vanaei, H. R., Eslami, A., & Egbewande, A. (2017). A review on pipeline corrosion, in-line inspection (ILI), and corrosion growth rate models. International Journal of Pressure Vessels and Piping, 149, 43-54.
[17] Faes, W., Lecompte, S., Ahmed, Z. Y., Van Bael, J., Salenbien, R., Verbeken, K., & De Paepe, M. (2019). Corrosion and corrosion prevention in heat exchangers. Corrosion Reviews, 37(2), 131-155.
[18] Shekari, E., Khan, F., & Ahmed, S. (2017). Economic risk analysis of pitting corrosion in process facilities. International Journal of Pressure Vessels and Piping, 157, 51-62.
[19] Kroon, D. H., Bowman, E., & Jacobson, G. (2019). Corrosion Management Can Save Water and Wastewater Utilities Billions of Dollars Annually. Journal: American Water Works Association, 111(1), 34-38.
[20] Demirbas, A., Alidrisi, H., & Balubaid, M. A. (2015). API gravity, sulfur content, and desulfurization of crude oil. Petroleum Science and Technology, 33(1), 93-101.
[21] Sk, M. H., & Abdullah, A. M. (2017). Corrosion of General Oil-field Grade Steel in CO2 Environment-an Update in the Light of Current Understanding. Int. J. Electrochem. Sci, 12, 4277-4290.
[22] Wang, Z., Liu, M., Lu, M., Zhang, L., Sun, J., Zhang, Z., & Tang, X. (2018). The effect of temperature on the hydrogen permeation of pipeline steel in wet hydrogen sulfide environments. Int. J. Electrochem. Sci, 13, 915-924.
[23] Yan, W., Brown, B., & Nesic, S. (2018). Investigation of the Threshold Level of H2S for Pitting of Mild Steel in CO2 Aqueous Solutions. In the NACE International Annual Conference and Exposition (p. 11472).
[24] Samimi., A; Tajik, H.R; Azizkhani, S; Dokhani, S; Godini, E;  Almasinia, B; Samimi, M; (2013), Examine the Effects of Greenhouse Gases on Climate Change", World of Sciences Journal, 12, 130-143.
[25] Eslamimanesh, A., Anderko, A., & Lencka, M. M. (2019). Prediction of General and Localized Corrosion of Corrosion-Resistant Alloys in Aggressive Environments. In CORROSION 2019. NACE International.
[26] Bhandari, J., Khan, F., Abbassi, R., Garaniya, V., & Ojeda, R. (2015). Modelling of pitting corrosion in marine and offshore steel structures–A technical review. Journal of Loss Prevention in the Process Industries, 37, 39-62.